POT-P Series Vibration Isolation Optical Table

Motorized Linear Stage – POT-P Series Vibration Table

POT-P Series Vibration Isolation Optical Table

For labs that pair a motorized linear stage with a stable optical platform, or need a precision linear stage for adjacent positioning work, the POT-P Series combines a carbon steel platform with solid rubber isolators for photonics, microscopy, and industrial measurement setups.

POT-G Series Hollow Cone Vibration Isolation Optical Table
POT-P Series solid rubber vibration isolation optical table

Stable support for precision optical work

The POT-P Series is a solid rubber vibration isolation optical table built around a carbon steel platform. The platform is engineered to resist deformation and to provide a stable foundation for laboratory and industrial optical setups.

Solid rubber isolators are combined with compound rubber pads to dampen vertical vibrations from 6.5 to 12 Hz and horizontal vibrations from 3.0 to 8.0 Hz. Manual leveling supports vertical adjustment within ±0.8 µm, while the total table height is listed at 800 mm.

The finely finished optical breadboard surface maintains a roughness level of ≤0.05 mm/m². A modular design allows integration with breadboard optical table assemblies and other system components, and the table accommodates custom optical table breadboard attachments.

POT-P Series solid rubber vibration isolation optical table
Carbon steel platform with compound rubber pad isolation.

Specification snapshot

Key figures listed for the POT-P Series.

Inherent frequency 6.5–12 Hz, vertically; 3.0–8.0 Hz, horizontally
Vibration isolation structure Compound rubber pads
Leveling type Manual
Total table height 800 mm
Breadboard surface roughness ≤0.05 mm/m²
Isolator height adjustment range ≤0.8 µm, matt surface finish

These values describe the solid rubber isolation system, carbon steel platform, and optical breadboard surface for the POT-P Series. Confirm the listed frequency range and table height against the installation plan before ordering.

POT-P Series Solid Rubber Vibration Isolation Optical Table
Specification details for the POT-P Series vibration isolation table.

Decision points for configuration

Use the published values to decide whether this table matches the intended optical setup.

Vibration frequency

Review the vertical range of 6.5–12 Hz and horizontal range of 3.0–8.0 Hz. These are the inherent frequency values listed for the compound rubber pad isolation structure.

Height and leveling

The total table height is 800 mm, and leveling is manual. The isolator height adjustment range is ≤0.8 µm with a matt surface finish.

Platform and surface

The carbon steel platform is designed to resist deformation. The optical breadboard surface is specified at a roughness level of ≤0.05 mm/m².

POT-P Series solid rubber vibration isolation optical table
Manual leveling and compound rubber pad isolation.

The POT-P Series is a relevant choice when the required setup calls for a carbon steel optical table platform, solid rubber isolators, compound rubber pads, and manual leveling in a single listed configuration. Compare those published values with the floor conditions and optical work planned for the installation.

If the project also uses other motion or optical hardware on the bench, keep the optical table height and leveling range in the same planning review. The product page provides the current configuration details and quote path.

Use cases supported by the published description

The product description names several precision optical and measurement environments.

  • Photonics experimentation
  • Microscopy
  • Interferometry
  • Optoelectronic testing
  • Industrial measurement environments

These applications rely on a stable optical platform and controlled vibration isolation. The POT-P Series combines a carbon steel platform with solid rubber isolators and compound rubber pads, and it is designed for laboratory and industrial environments.

The modular design supports integration with breadboard optical table assemblies and other system components. Custom optical table breadboard attachments can also be accommodated, which helps when the table needs to fit a specific optical layout.

POT-P Series solid rubber vibration isolation optical table
Optical table platform suited to photonics, microscopy, and measurement work.
POT-P Series solid rubber vibration isolation optical table
Modular platform for breadboard optical table assemblies.

Integration and maintenance

The modular design enables integration with breadboard optical table assemblies and other system components. The carbon steel platform is engineered to resist deformation while providing a stable foundation for optical hardware.

The table accommodates custom optical table breadboard attachments, so the assembly can be planned around the required optical layout. Maintenance and inspection are described as straightforward, which supports routine checks in laboratory and industrial settings.

For a complete setup, review the table height, manual leveling range, and breadboard surface roughness together with the attachment plan. These published details help confirm that the POT-P Series fits the intended optical bench arrangement.

Ordering and verification

Confirm the listed configuration details before requesting a quote.

Before ordering, confirm the inherent frequency range, compound rubber pad isolation structure, manual leveling type, 800 mm total table height, breadboard surface roughness of ≤0.05 mm/m², and isolator height adjustment range of ≤0.8 µm. These are the specifications listed for the POT-P Series.

The product page lists a price of $1114.00 and uses a quote-based contact path. Include the intended application, required quantity, and any attachment or integration needs when requesting current pricing, lead time, and configuration details.

POT-P Series solid rubber vibration isolation optical table
Review the published specifications before requesting a quote.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

How Do Solid Rubber Isolators Damp an Optical Table in a Lab?

Solid rubber isolators damp an optical table by turning small table movements into heat and reducing how long motion persists.

Read article

Rigid Optical Platforms Compared with Air-Floating Tables in Photonics Labs

A photonics bench only performs as well as the support beneath it, and air supply, upkeep, and vibration frequency decide which platform type fits a working lab.

Read article

Carbon Steel Stiffness in Passive Optical Tables for Labs

Carbon steel earns its place in a passive optical platform by holding optical hardware in fixed relative positions while the isolators absorb floor motion.

Read article

Frequently Asked Questions

What is the pot-p series designed to support?

the pot-p series is a solid rubber vibration isolation optical table designed for precision optical setups, photonics experimentation, microscopy, interferometry, optoelectronic testing, and industrial measurement environments.

What vibration isolation frequencies does the pot-p series list?

the product page lists inherent frequency at 6.5–12 hz vertically and 3.0–8.0 hz horizontally, using compound rubber pads.

What are the main table specifications?

the listed specifications include an 800 mm total table height, manual leveling, a breadboard surface roughness of ≤0.05 mm/m², and an isolator height adjustment range of ≤0.8 µm with a matt surface finish.

How is the optical breadboard surface finished?

the carbon steel platform has a finely finished optical breadboard surface specified at a roughness level of ≤0.05 mm/m².

Can the table be integrated with other optical assemblies?

the modular design allows integration with breadboard optical table assemblies and other system components, and it accommodates custom optical table breadboard attachments.

How can i request pricing or product information?

the product page lists a price of $1114.00 and uses a quote-based contact path; use the contact us page to request current pricing, lead time, and configuration details.

Leave a message
First Name*
Last Name*
Email*
Mobile phone number
Message*
Company Name